Additive Manufacturing

Author : Ian Gibson
Publisher : Springer Nature
ISBN 13 : 3030561275
Total Pages : 685 pages
Book Rating : 4.77/5 ( download)

DOWNLOAD NOW!

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Author : Andreas Gebhardt
Publisher : Hanser Gardner Publications
ISBN 13 : 9781569905821
Total Pages : 591 pages
Book Rating : 4.27/5 ( download)

DOWNLOAD NOW!

Download or read book Additive Manufacturing written by Andreas Gebhardt and published by Hanser Gardner Publications. This book was released on 2016 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of additive manufacturing for the direct production of finished products is becoming increasingly important. The method not only reduces the demands on industrial infrastructure, but also opens up new perspectives in terms of decentralized production and customer inclusive individualized production (customization, cyberproduction). Oriented towards the practitioner, in this book the basics of additive manufacturing are presented and the properties and special aspects of industrially available machines are discussed. From the generation of data to the forming method, the complete process chain is shown in a practical light. In particular, the following additive manufacturing technologies are discussed: - Polymerization (e.g., stereolithography) - Sintering and melting (e.g., laser sintering) - Layer laminate method (e.g., laminated object manufacturing, LOM) - Extrusion (e.g., fused deposition modeling, FDM) - 3D printing Applications for the production of models and prototypes (rapid prototyping), tools, tool inserts, and forms (rapid tooling) as well as end products (rapid manufacturing) are covered in detailed chapters with examples. Questions of efficiency are discussed from a strategic point of view, and also from an operational perspective.

Author : Amit Bandyopadhyay
Publisher : CRC Press
ISBN 13 : 1498766706
Total Pages : 559 pages
Book Rating : 4.08/5 ( download)

DOWNLOAD NOW!

Download or read book Additive Manufacturing written by Amit Bandyopadhyay and published by CRC Press. This book was released on 2015-09-08 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of additive manufacturing has seen explosive growth in recent years due largely in part to renewed interest from the manufacturing sector. Conceptually, additive manufacturing, or industrial 3D printing, is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Today, mo

Author : Juan Pou
Publisher : Elsevier
ISBN 13 : 0128184124
Total Pages : 768 pages
Book Rating : 4.27/5 ( download)

DOWNLOAD NOW!

Download or read book Additive Manufacturing written by Juan Pou and published by Elsevier. This book was released on 2021-05-21 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing explains the background theory, working principles, technical specifications, and latest developments in a wide range of additive manufacturing techniques. Topics addressed include treatments of manufactured parts, surface characterization, and the effects of surface treatments on mechanical behavior. Many different perspectives are covered, including design aspects, technologies, materials and sustainability. Experts in both academia and industry contribute to this comprehensive guide, combining theoretical developments with practical improvements from R&D. This unique guide allows readers to compare the characteristics of different processes, understand how they work, and provide parameters for their effective implementation. This book is part of a four-volume set entitled Handbooks in Advanced Manufacturing. Other titles in the set include Advanced Machining and Finishing, Advanced Welding and Deformation, and Sustainable Manufacturing Processes. Provides theory, operational parameters, and latest developments in 20 different additive manufacturing processes Includes contributions from experts in industry and academia with a wide range of disciplinary backgrounds, providing a comprehensive survey of this diverse and influential subject Includes case studies of innovative additive manufacturing practices from industry

Author : Jing Zhang
Publisher : Butterworth-Heinemann
ISBN 13 : 0128123273
Total Pages : 362 pages
Book Rating : 4.70/5 ( download)

DOWNLOAD NOW!

Download or read book Additive Manufacturing: Materials, Processes, Quantifications and Applications written by Jing Zhang and published by Butterworth-Heinemann. This book was released on 2018-05-17 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing: Materials, Processes, Quantifications and Applications is designed to explain the engineering aspects and physical principles of available AM technologies and their most relevant applications. It begins with a review of the recent developments in this technology and then progresses to a discussion of the criteria needed to successfully select an AM technology for the embodiment of a particular design, discussing material compatibility, interfaces issues and strength requirements. The book concludes with a review of the applications in various industries, including bio, energy, aerospace and electronics. This book will be a must read for those interested in a practical, comprehensive introduction to additive manufacturing, an area with tremendous potential for producing high-value, complex, individually customized parts. As 3D printing technology advances, both in hardware and software, together with reduced materials cost and complexity of creating 3D printed items, these applications are quickly expanding into the mass market. Includes a discussion of the historical development and physical principles of current AM technologies Exposes readers to the engineering principles for evaluating and quantifying AM technologies Explores the uses of Additive Manufacturing in various industries, most notably aerospace, medical, energy and electronics

Author : Martin Leary
Publisher : Elsevier
ISBN 13 : 0128168870
Total Pages : 358 pages
Book Rating : 4.75/5 ( download)

DOWNLOAD NOW!

Download or read book Design for Additive Manufacturing written by Martin Leary and published by Elsevier. This book was released on 2019-12-03 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for Additive Manufacturing is a complete guide to design tools for the manufacturing requirements of AM and how they can enable the optimization of process and product parameters for the reduction of manufacturing costs and effort. This timely synopsis of state-of-the-art design tools for AM brings the reader right up-to-date on the latest methods from both academia and industry. Tools for both metallic and polymeric AM technologies are presented and critically reviewed, along with their manufacturing attributes. Commercial applications of AM are also explained with case studies from a range of industries, thus demonstrating best-practice in AM design. Covers all the commonly used tools for designing for additive manufacturing, as well as descriptions of important emerging technologies Provides systematic methods for optimizing AM process selection for specific production requirement Addresses design tools for both metallic and polymeric AM technologies Includes commercially relevant case studies that showcase best-practice in AM design, including the biomedical, aerospace, defense and automotive sectors

Author : Skylar Tibbits
Publisher : Taylor & Francis
ISBN 13 : 1317437020
Total Pages : 198 pages
Book Rating : 4.24/5 ( download)

DOWNLOAD NOW!

Download or read book Self-Assembly Lab written by Skylar Tibbits and published by Taylor & Francis. This book was released on 2016-11-10 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: What if structures could build themselves or adapt to fluctuating environments? Skylar Tibbits, Director of the Self-Assembly Lab in the Department of Architecture at MIT, Cambridge, MA, crosses the boundaries between architecture, biology, materials science and the arts, to envision a world where material components can self-assemble to provide adapting structures and optimized fabrication solutions. The book examines the three main ingredients for self-assembly, includes interviews with practitioners involved in the work and presents research projects related to these topics to provide a complete first look at exciting future technologies in construction and self-transforming material products.

Author : John O. Milewski
Publisher : Springer
ISBN 13 : 3319582054
Total Pages : 343 pages
Book Rating : 4.54/5 ( download)

DOWNLOAD NOW!

Download or read book Additive Manufacturing of Metals written by John O. Milewski and published by Springer. This book was released on 2017-06-28 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This engaging volume presents the exciting new technology of additive manufacturing (AM) of metal objects for a broad audience of academic and industry researchers, manufacturing professionals, undergraduate and graduate students, hobbyists, and artists. Innovative applications ranging from rocket nozzles to custom jewelry to medical implants illustrate a new world of freedom in design and fabrication, creating objects otherwise not possible by conventional means. The author describes the various methods and advanced metals used to create high value components, enabling readers to choose which process is best for them. Of particular interest is how harnessing the power of lasers, electron beams, and electric arcs, as directed by advanced computer models, robots, and 3D printing systems, can create otherwise unattainable objects. A timeline depicting the evolution of metalworking, accelerated by the computer and information age, ties AM metal technology to the rapid evolution of global technology trends. Charts, diagrams, and illustrations complement the text to describe the diverse set of technologies brought together in the AM processing of metal. Extensive listing of terms, definitions, and acronyms provides the reader with a quick reference guide to the language of AM metal processing. The book directs the reader to a wealth of internet sites providing further reading and resources, such as vendors and service providers, to jump start those interested in taking the first steps to establishing AM metal capability on whatever scale. The appendix provides hands-on example exercises for those ready to engage in experiential self-directed learning.

Author : M. Manjaiah
Publisher : Woodhead Publishing
ISBN 13 : 0128220570
Total Pages : 325 pages
Book Rating : 4.73/5 ( download)

DOWNLOAD NOW!

Download or read book Additive Manufacturing written by M. Manjaiah and published by Woodhead Publishing. This book was released on 2021-07-17 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing: A Tool for Industrial Revolution 4.0 explores the latest developments, underlying mechanisms, challenges and opportunities for 3D printing in a digital manufacturing environment. It uses an international panel of experts to explain how additive manufacturing processes have been successfully integrated with industry 4.0 technologies for increased technical capabilities, efficiency, flexibility and sustainability. The full manufacturing product cycle is addressed, including design, materials, mechanical properties, and measurement. Future directions for this important technological intersection are also explored. This book will interest researchers and industrial professionals in industrial engineering, digital manufacturing, advanced manufacturing, data science applications, and computer engineering. Addresses a wide range of additive manufacturing technology, including processes, controls and operation Explains many new and sustainable additive manufacturing methods Provides detailed descriptions on how to modernize and optimize conventional additive manufacturing methodologies in order to take full advantage of synergies with industry 4.0

Author : Dyuti Sarker
Publisher : John Wiley & Sons
ISBN 13 : 1119210836
Total Pages : 624 pages
Book Rating : 4.32/5 ( download)

DOWNLOAD NOW!

Download or read book Metal Additive Manufacturing written by Dyuti Sarker and published by John Wiley & Sons. This book was released on 2021-10-26 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: METAL ADDITIVE MANUFACTURING A comprehensive review of additive manufacturing processes for metallic structures Additive Manufacturing (AM)—also commonly referred to as 3D printing—builds three-dimensional objects by adding materials layer by layer. Recent years have seen unprecedented investment in additive manufacturing research and development by governments and corporations worldwide. This technology has the potential to replace many conventional manufacturing processes, enable the development of new industry practices, and transform the entire manufacturing enterprise. Metal Additive Manufacturing provides an up-to-date review of all essential physics of metal additive manufacturing techniques with emphasis on both laser-based and non-laser-based additive manufacturing processes. This comprehensive volume covers fundamental processes and equipment, governing physics and modelling, design and topology optimization, and more. The text adresses introductory, intermediate, and advanced topics ranging from basic additive manufacturing process classification to practical and material design aspects of additive manufacturability. Written by a panel of expert authors in the field, this authoritative resource: Provides a thorough analysis of AM processes and their theoretical foundations Explains the classification, advantages, and applications of AM processes Describes the equipment required for different AM processes for metallic structures, including laser technologies, positioning devices, feeder and spreader mechanisms, and CAD software Discusses the opportunities, challenges, and current and emerging trends within the field Covers practical considerations, including design for AM, safety, quality assurance, automation, and real-time control of AM processes Includes illustrative cases studies and numerous figures and tables Featuring material drawn from the lead author’s research and professional experience on laser additive manufacturing, Metal Additive Manufacturing is an important source for manufacturing professionals, research and development engineers in the additive industry, and students and researchers involved in mechanical, mechatronics, automatic control, and materials engineering and science.