Transmission Pipeline Calculations And Simulations Manual

Author : E. Shashi Menon
Publisher : Gulf Professional Publishing
ISBN 13 : 1856178315
Total Pages : 612 pages
Book Rating : 4.10/5 ( download)

DOWNLOAD NOW!

Download or read book Transmission Pipeline Calculations and Simulations Manual written by E. Shashi Menon and published by Gulf Professional Publishing. This book was released on 2014-12-27 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transmission Pipeline Calculations and Simulations Manual is a valuable time- and money-saving tool to quickly pinpoint the essential formulae, equations, and calculations needed for transmission pipeline routing and construction decisions. The manual’s three-part treatment starts with gas and petroleum data tables, followed by self-contained chapters concerning applications. Case studies at the end of each chapter provide practical experience for problem solving. Topics in this book include pressure and temperature profile of natural gas pipelines, how to size pipelines for specified flow rate and pressure limitations, and calculating the locations and HP of compressor stations and pumping stations on long distance pipelines. Case studies are based on the author’s personal field experiences Component to system level coverage Save time and money designing pipe routes well Design and verify piping systems before going to the field Increase design accuracy and systems effectiveness

Author : Shashi Menon
Publisher : Trafford Publishing
ISBN 13 : 1466976705
Total Pages : 537 pages
Book Rating : 4.02/5 ( download)

DOWNLOAD NOW!

Download or read book Gas Pipeline Hydraulics written by Shashi Menon and published by Trafford Publishing. This book was released on 2013 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the steady state hydraulics of natural gas and other compressible fluids being transported through pipelines. Our main approach is to determine the flow rate possible and compressor station horsepower required within the limitations of pipe strength, based on the pipe materials and grade. It addresses the scenarios where one or more compressors may be required depending on the gas flow rate and if discharge cooling is needed to limit the gas temperatures. The book is the result of over 38 years of the authors' experience on pipelines in North and South America while working for major energy companies such as ARCO, El Paso Energy, etc.

Author : E. Shashi Menon
Publisher : Gulf Professional Publishing
ISBN 13 : 9780123838544
Total Pages : 576 pages
Book Rating : 4.41/5 ( download)

DOWNLOAD NOW!

Download or read book Pipeline Planning and Construction Field Manual written by E. Shashi Menon and published by Gulf Professional Publishing. This book was released on 1978-06-26 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipeline Planning and Construction Field Manual aims to guide engineers and technicians in the processes of planning, designing, and construction of a pipeline system, as well as to provide the necessary tools for cost estimations, specifications, and field maintenance. The text includes understandable pipeline schematics, tables, and DIY checklists. This source is a collaborative work of a team of experts with over 180 years of combined experience throughout the United States and other countries in pipeline planning and construction. Comprised of 21 chapters, the book walks readers through the steps of pipeline construction and management. The comprehensive guide that this source provides enables engineers and technicians to manage routine auditing of technical work output relative to technical input and established expectations and standards, and to assess and estimate the work, including design integrity and product requirements, from its research to completion. Design, piping, civil, mechanical, petroleum, chemical, project production and project reservoir engineers, including novices and students, will find this book invaluable for their engineering practices. Back-of-the envelope calculations Checklists for maintenance operations Checklists for environmental compliance Simulations, modeling tools and equipment design Guide for pump and pumping station placement

Author : Philip Ellenberger
Publisher : Elsevier
ISBN 13 : 0124169686
Total Pages : 412 pages
Book Rating : 4.85/5 ( download)

DOWNLOAD NOW!

Download or read book Piping and Pipeline Calculations Manual written by Philip Ellenberger and published by Elsevier. This book was released on 2014-01-22 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. Updates to major codes and standards such as ASME B31.1 and B31.12 New methods for calculating stress intensification factor (SIF) and seismic activities Risk-based analysis based on API 579, and B31-G Covers the Pipeline Safety Act and the creation of PhMSA

Author : Ali Ismet Kanlı
Publisher : BoD – Books on Demand
ISBN 13 : 1839696621
Total Pages : 142 pages
Book Rating : 4.26/5 ( download)

DOWNLOAD NOW!

Download or read book Topics on Oil and Gas written by Ali Ismet Kanlı and published by BoD – Books on Demand. This book was released on 2023-12-20 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir characterization is the model that characterizes reservoirs based on their ability to store and produce hydrocarbons. Reservoir modeling is the process of creating a three-dimensional representation of a given reservoir based on its petrophysical, geological, and geophysical properties. Reservoir engineering is the formulation of development and production plans that will result in maximum recovery for a given set of economic, environmental, and technical constraints. It is not a one-time activity but needs continual updating throughout the production life of a reservoir. Reservoir management is often defined as the allocation of resources to optimize hydrocarbon recovery from a reservoir while minimizing capital investments and operating expenses. The oil and gas industry is divided into upstream and downstream sectors. In general, the upstream sector involves activities carried out at a reservoir, while the downstream sector involves all petroleum processing activities carried out in a refinery. Petroleum processing engineering involves all downstream crude oil processing operations, from crude oil as the feedstock to final products such as gasoline, kerosene, diesel, gas oil, and lubricating oil. Petroleum processing technology continues to develop in consideration of all types of sustainability-related challenges. This book provides a comprehensive overview of the oil and gas industry, presenting the most recent research in the field.

Author : Yonghua Song
Publisher : Springer Nature
ISBN 13 : 9819910900
Total Pages : 262 pages
Book Rating : 4.08/5 ( download)

DOWNLOAD NOW!

Download or read book Risk Modeling, Analysis and Control of Multi-energy Systems written by Yonghua Song and published by Springer Nature. This book was released on 2023-06-08 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the risk modeling, analysis and control of multi-energy systems considering cross-sectorial failure propagation. Both models and methods have been addressed with engineering practice. This is accomplished by doing a thorough investigation into the modeling of system physics and reliabilities in both long- and short-term phases. Different models and methods to evaluate the risk of multi-energy systems considering various disturbances, e.g., component failures, load uncertainties and extreme weather, are studied in detail. Furthermore, several risk control strategies for multi-energy systems, such as long-term capacity planning and integrated demand response, are analyzed in this book, which is especially suited for readers interested in system risk management. The book can benefit researchers, engineers, and graduate students in the fields of electrical and electronic engineering, energy engineering, complex network and control engineering, etc.

Author : Mojtaba Mahmoodian
Publisher : Gulf Professional Publishing
ISBN 13 : 0128135794
Total Pages : 186 pages
Book Rating : 4.92/5 ( download)

DOWNLOAD NOW!

Download or read book Reliability and Maintainability of In-Service Pipelines written by Mojtaba Mahmoodian and published by Gulf Professional Publishing. This book was released on 2018-06-13 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability and Maintainability of In-Service Pipelines helps engineers understand the best structural analysis methods and more accurately predict the life of their pipeline assets. Expanded to cover real case studies from oil and gas, sewer and water pipes, this reference also explains inline inspection and how the practice influences reliability analysis, along with various reliability models beyond the well-known Monte Carlo method. Encompassing both numerical and analytical methods in structural reliability analysis, this book gives engineers a stronger point of reference covering both pipeline maintenance and monitoring techniques in a single resource. Provides tactics on cost-effective pipeline integrity management decisions and strategy for a variety of different pipes Presents readers with rational tools for strengthening and rehabing existing pipelines Teaches how to optimize materials selection and design parameters for designing future pipelines with a longer service life

Author : Reza Azin
Publisher : Springer Nature
ISBN 13 : 3030772004
Total Pages : 464 pages
Book Rating : 4.00/5 ( download)

DOWNLOAD NOW!

Download or read book Fundamentals and Practical Aspects of Gas Injection written by Reza Azin and published by Springer Nature. This book was released on 2021-07-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers different aspects of gas injection, from the classic pressure maintenance operation to enhanced oil recovery (EOR), underground gas storage (UGS), and carbon capture and storage (CCS). The authors detail the unique characteristics and specific criteria of each application, including: material balance equations phase behaviour reservoir engineering well design operating aspects surface facilities environmental issues Examples, data, and simulation codes are provided to enable the reader to gain an in-depth understanding of these applications. Fundamentals and Practical Aspects of Gas Injection will be of use to practising engineers in the fields of reservoir engineering, and enhanced oil recovery. It will also be of interest to researchers, academics, and graduate students working in the field of petroleum engineering.

Author : Timo Reis
Publisher : Springer Nature
ISBN 13 : 3030539059
Total Pages : 486 pages
Book Rating : 4.54/5 ( download)

DOWNLOAD NOW!

Download or read book Progress in Differential-Algebraic Equations II written by Timo Reis and published by Springer Nature. This book was released on 2020-10-10 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains articles presented at the 9th Workshop on Differential-Algebraic Equations held in Paderborn, Germany, from 17–20 March 2019. The workshop brought together more than 40 mathematicians and engineers from various fields, such as numerical and functional analysis, control theory, mechanics and electromagnetic field theory. The participants focussed on the theoretical and numerical treatment of “descriptor” systems, i.e., differential-algebraic equations (DAEs). The book contains 14 contributions and is organized into four parts: mathematical analysis, numerics and model order reduction, control as well as applications. It is a useful resource for applied mathematicians with interest in recent developments in the field of differential algebraic equations but also for engineers, in particular those interested in modelling of constraint mechanical systems, thermal networks or electric circuits.

Author : Chi M. Phan
Publisher : CRC Press
ISBN 13 : 1003813844
Total Pages : 162 pages
Book Rating : 4.42/5 ( download)

DOWNLOAD NOW!

Download or read book Numerical Calculations for Process Engineering Using Excel VBA written by Chi M. Phan and published by CRC Press. This book was released on 2023-11-27 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Calculations for Process Engineering Using Excel VBA provides numerical treatment of process engineering problems with VBA programming and Excel spreadsheets. The problems are solving material and energy balances, optimising reactors and modelling multiple-factor processes. The book includes both basic and advanced codes for numerical calculations. The basic methods are presented in different variations tailored to particular applications. Some macros are combined with each other to solve engineering problems. Examples include combining the bisection method and binary search to optimise an implicit correlation, combining golden section search with Euler’s method to optimise a reactor and combining bisection code and Euler’s method to solve steady-state heat distribution. The text also includes nonconventional examples such as harmony search and network analysis. The examples include solutions to common engineering problems such as adiabatic flame temperature, plug flow reactor conversion, batch reactor, heat diffusion and pinch analysis of heat exchanger networks. The VBA code is presented with mathematical equations and flowcharts, enabling the audience to adopt the solutions to different problems. The book contains many demonstrations of numerical techniques to guide users. It also includes useful summaries of VBA commands/functions and Excel-predefined functions accessible in VBA. While the book is developed primarily for undergraduate students, the book is a helpful resource for postgraduate students and engineers.